Skip to main content

Clip-on Instrument Microphone PRO35

$149.00
(No reviews yet)
UPC:
4961310084325
Weight:
1.00 LBS
Shipping:
Calculated at Checkout

Designed for sax, toms, brass and percussion, the PRO 35 excels in high-SPL applications and is ideal for active stage performances. Its extended frequency response captures subtle nuances of the performance. The included UniMount® clip permits accurate positioning and provides shock resistance while protecting the element. The microphone’s cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of the desired sound source.

ELEMENT: Fixed-charge back plate, permanently polarized condenser
POLAR PATTERN: Cardioid
FREQUENCY RESPONSE: 50-15,000 Hz
LOW FREQUENCY ROLL-OFF: 80 Hz, 18 dB/octave
OPEN CIRCUIT SENSITIVITY: -45 dB (5.6 mV) re 1V at 1 Pa
IMPEDANCE: 250 ohms
MAXIMUM INPUT SOUND LEVEL: 145 dB SPL, 1 kHz at 1% T.H.D.
DYNAMIC RANGE (typical): 115 dB, 1 kHz at Max SPL
SIGNAL-TO-NOISE RATIO: 64 dB, 1 kHz at 1 Pa
PHANTOM POWER REQUIREMENTS: 11-52V DC, 2 mA typical
SWITCH: Flat, roll-off
WEIGHT (MICROPHONE): 0.3 oz (8 g)
WEIGHT (POWER MODULE): 2.9 oz (81 g)
DIMENSIONS (MICROPHONE): 0.98" (25.0 mm) long,
0.40" (10.2 mm) diameter
DIMENSIONS (POWER MODULE): 3.66" (92.9 mm) long,
0.74" (18.9 mm) diameter
OUTPUT CONNECTOR (POWER MODULE): Integral 3-pin XLRM-type
CABLE 6.0' (1.8 m) long (permanently attached to microphone), 0.10" (2.6 mm) diameter, 2-conductor, shielded cable with TA3F-type connector
ACCESSORIES FURNISHED: AT8418 UniMount® microphone instrument mount; AT8538 power module; soft protective pouch

2 Years